|
General
Specifications
Power Range: 0.33 to 15 HP (0.25 to 11 kW)
Supply
Power:
Single Phase: 120, 208, 220 or 240 VAC
Three Phase: 208, 220, 240, 400 or 480 VAC (+10/-15%) 50 / 60 Hz
Motors:
The SCM is designed to operate standard polyphase induction motors
rated for 200, 230, 400 or 460 VAC from 0 to 240 Hz.
Enclosure:
IP20 with finger safe terminals.
Standard
Features
Easy Set-up and Operation: The SCM is easy to use right out of
the box or can be customized to meet your specific requirements any
one of four convenient ways:
- From the
front of the drive
- The Remote
Keypad option
- The
innovative EPM Programmer.
- A PC using AC
Tech’s free TechLink
Software and the EPM Programmer
Motor
Thermal Overload: The SCM is an approved motor protection
device for single motor applications.
Control
I/O: Eleven isolated terminals provide connection for 0-10V
or 4-20mA reference, 1 fixed and 3 programmable logic inputs and 1
programmable relay output.
Quiet
Operation: Adjustable carrier frequency to 10kHz
|
|
SCM
Options
Remote Keypad:
Simple four wire connection to the SCM for operation and programming
of the drive. High-impact plastic and gasket permit installation in
NEMA 4X (IP65) environments.
(instruction
sheet available in Library)
DIN Rail
Mounting Kit:
Allows easy mounting of the SCM Drive onto standard DIN Rail.
(instruction
sheet available in Library)
Dynamic
Braking Kit:
Prepackaged resistor modules with control electronics provide easy
mounting within the control cabinet.
(instruction
sheet available in Library)
AC Line
Filters:
AC input line filters are available for all sub-micro drives to meet
European requirements for susceptibility and emissions of electrical
and radiated noise (EN 61800-3 and EN 5501). The filter is designed to
mount to the electrical panel and has provisions for mounting the
drive directly to the face of the filter.
EPM
Programmer:
Copy drive programs in 2 seconds using The EPM Programmer! Then just
plug the EPM into the SCM Series drive and it’s ready for operation.
The EPM Programmer also provides full programming capability using the
backlit LCD display and file exchange with a Personal Computer.
(instruction
sheet available in Library)
|
|
